点击图片查看原图
Peppers cable gland Type E
代理商：上海颐品自动化科技有限公司
Peppers防爆格兰，Peppers防爆变径，Peppers防爆堵头，Peppers防爆呼吸阀
Peppers cable gland Type E
Double Compression Gland for Armoured Cable featuring Dedicated Armour Clamping
“E” type double compression glands provide a controlled IP seal on the cable inner sheath, an environmental seal on the outer sheath
and a detachable armour specific clamping system for wire (W), braid/tape (X) armoured cables. The gland has been tested to IP66 and
IP68 to 50 metres. The Integral Earth, “IE” version, allows the gland to be used with HV cables where the fault load is greater than 10.4kA
and options are available for use with lead sheath, LSOH cables and extreme temperature applications.
Example Part Numbering(See below for details)
E1WB/NP/20/050NPT
Materials: Aluminium, Brass or Stainless Steel
COMPLIANCE STANDARDS:
IEC 62444，EN 62444，BS 6121
CERTIFICATION:
ABS Specified ABS Rules
CERTIFICATE NO.
ABS 14-LD463991-1-PDA
16 M16 x 1.5 1/2” or 3/4” 16 3.5 8.4 8.4 13.5 4.9 10.3 0.90 0.15-0.35 58 24.0 26.5 0.143 L24
16 M20 x 1.5 1/2” or 3/4” 16 3.5 8.4 8.4 13.5 4.9 10.3 0.90 0.15-0.35 58 24.0 26.5 0.154 L24
20S M20 x 1.5 1/2” or 3/4” 16 8.0 11.7 11.5 16.0 9.4 12.5 0.90-1.25 0.15-0.35 58 24.0 26.5 0.125 L24
20 M20 x 1.5 1/2” or 3/4” 16 6.7* 14.0 15.5 21.1 12.0 17.6 0.90-1.25 0.15-0.50 58 30.0 33.0 0.180 L30
25 M25 x 1.5 3/4” or 1” 16 13.0 20.0 20.3 27.4 16.8 23.9 1.25-1.60 0.15-0.55 58 37.6 41.4 0.256 L38
32 M32 x 1.5 1” or 1 ¼” 16 19.0 26.3 26.7 34.0 23.2 30.5 1.60-2.00 0.20-0.60 65 46.0 50.6 0.400 L46
40 M40 x 1.5 1 ¼” or 1 ½” 16 25.0 32.2 33.0 40.6 28.6 36.2 1.60-2.00 0.20-0.60 72 55.0 60.5 0.649 L55
50S M50 x 1.5 1 ½” or 2” 16 31.5 38.2 39.4 46.7 34.8 42.4 2.00-2.50 0.30-0.80 73 65.0 71.5 0.940 L65
50H M50 x 1.5 1 ½” or 2” 16 31.5 38.2 45.7 53.2 41.1 48.5 2.00-2.50 0.30-0.80 73 65.0 71.5 0.849 L65
50 M50 x 1.5 2” 16 36.5 44.1 45.7 53.2 41.1 48.5 2.00-2.50 0.30-0.80 73 65.0 71.5 0.707 L65
63S M63 x 1.5 2” or 2 ½” 19 42.5 50.1 52.1 59.5 47.5 54.8 2.50 0.30-0.80 76 80.0 88.0 1.369 L80
63H M63 x 1.5 2” or 2 ½” 19 42.5 50.1 58.4 65.8 53.8 61.2 2.50 0.30-0.80 76 80.0 88.0 1.306 L80
63 M63 x 1.5 2 ½” 19 49.5 56.0 58.4 65.8 53.8 61.2 2.50 0.30-1.00 76 80.0 88.0 1.123 L80
75S M75 x 1.5 2 ½” or 3” 19 54.5 62.0 64.8 72.2 60.2 68.0 2.50 0.30-1.00 82 90.0 99.0 1.661 L90
75H M75 x 1.5 2 ½” or 3” 19 54.5 62.0 71.1 78.0 66.5 73.4 2.50 0.30-1.00 82 90.0 99.0 1.553 L90
75 M75 x 1.5 3” 19 60.5 68.0 71.1 78.0 66.5 73.4 2.50 0.30-1.00 82 90.0 99.0 1.310 L90
80 M80 x 2.0 3” or 3 ½” 25 62.2 72.0 77.0 84.0 71.9 79.4 3.15 0.45-1.00 110 104.0 115.2 2.718 L104
80H M80 x 2.0 3” or 3 ½” 25 62.2 72.0 79.6 90.0 75.0 85.4 3.15 0.45-1.00 110 104.0 115.2 2.489 L104
85 M85 x 2.0 3” or 3 ½” 25 69.0 78.0 79.6 90.0 75.0 85.4 3.15 0.45-1.00 110 104.0 115.2 2.326 L104
90 M90 x 2.0 3 ½” or 4” 25 74.0 84.0 88.0 96.0 82.0 91.4 3.15 0.45-1.00 110 114.0 125.7 2.852 L114
90H M90 x 2.0 3 ½” or 4” 25 74.0 84.0 92.0 102.0 87.4 97.4 3.15 0.45-1.00 110 114.0 125.7 2.629 L114
100 M100 x 2.0 3 ½” or 4” 25 82.0 90.0 92.0 102.0 87.4 97.4 3.15 0.45-1.00 110 114.0 125.7 2.496 L114
110 M110 x 2.0 - 25 87.0 102.0 100.0 117.0 - - 3.15 0.45-1.00 185 135.0 148.0 4.190 N/A
120 M120 x 2.0 - 25 97.0 112.0 110.0 127.0 - - 3.15 0.45-1.00 185 145.0 159.0 5.750 N/A
130 M130 x 2.0 - 25 107.0 122.0 120.0 137.0 - - 3.15 0.45-1.00 185 155.0 170.0 6.900 N/A
• Gland size does not necessarily equate to the entry thread size.
• Dimensions (A) & (B) may differ for glands with non metric entry threads. Please refer to our “Thread Reference Tables” for specific dimensions.
• Assembly instructions must be read prior to installation and adhered to in full.
• Peppers supplies cable glands with parallel entry threads that conform to the flameproof threaded joint requirements of IEC/EN 60079-1 and other
equivalent standards. They usually incorporate a thread run out according to the available machining techniques and will not have a full form thread
for the entire length. Peppers Cable Glands Limited will not be held responsible for clients’ installations where this has not been taken into account.
• * For gland size 20 the silicone inner seal has a minimum diameter of 9.3 mm and NOT 6.7mm.
• When selecting IP Washer & Shroud material for use with glands, please be aware of the accessories temperature range to ensure they are suitable
for the intended installation.
Peppers防爆格兰，Peppers防爆变径，Peppers防爆堵头，Peppers防爆呼吸阀
Hawke防爆格兰，Hawke防爆变径，Hawke防爆堵头，Hawke防爆呼吸阀等
Feam防爆格兰，Bartec防爆变径，Feam防爆堵头，Bartec防爆呼吸阀等
Cooper防爆格兰，Cooper爆变径，Cooper防爆堵头，Cooper防爆呼吸阀等
Peppers防爆格兰及附件代理商：上海颐品自动化科技有限公司